4501 synthetic turbine molecular pump lubricating oil
Introduction:
4501 synthetic turbine molecular pump lubricating oil is based on synthetic oil and refined with a variety of high-quality additives.
Detailed introduction
summary:
This product is based on synthetic oil and refined with a variety of high-quality additives.
[performance features]
Excellent viscosity temperature performance, wide oil temperature range;
High vacuum performance, low evaporation loss, low oil consumption, good lubricity, protection equipment to reduce wear;
Good rubber adaptability to ensure the sealing performance of the equipment system.
[executive standard]
This product meets the following specifications: Q / sh303 101-2004.
[typical data]
[purpose]
This product can be used for lubrication of various types of molecular pump bearings with a speed of 20000r / min ~ 60000r / min and a limit pressure of 1.3x10-pa, and also for lubrication of vacuum equipment.
[products with equivalent performance abroad]
This product has the same performance as Swiss T-12 and German lh-85328.
[precautions]
When using for the first time, please clean the lubricating system, and this product should not be mixed with other oil products; ◎ after using, please tighten the end of the barrel in time to avoid mixing water and impurities;
This product should be stored in a clean, dry and dark place.
[packaging]
* 4L iron bucket, 20L plastic bucket or packaging according to customers' requirements.
This product is based on synthetic oil and refined with a variety of high-quality additives.
[performance features]
Excellent viscosity temperature performance, wide oil temperature range;
High vacuum performance, low evaporation loss, low oil consumption, good lubricity, protection equipment to reduce wear;
Good rubber adaptability to ensure the sealing performance of the equipment system.
[executive standard]
This product meets the following specifications: Q / sh303 101-2004.
[typical data]
|
Project |
Typical data |
|
Kinematic viscosity，mm 2/s |
|
|
100℃ |
3.76 |
|
40℃ |
14.3 |
|
viscosity index |
162 |
|
Flash point (open)，℃ |
|
|
Freezing point，℃ |
< -60 |
|
Neutralization value，mgK〇H/g |
0.2 |
|
Evaporation(10CTC, 3h), % (m/m) |
0.3 |
This product can be used for lubrication of various types of molecular pump bearings with a speed of 20000r / min ~ 60000r / min and a limit pressure of 1.3x10-pa, and also for lubrication of vacuum equipment.
[products with equivalent performance abroad]
This product has the same performance as Swiss T-12 and German lh-85328.
[precautions]
When using for the first time, please clean the lubricating system, and this product should not be mixed with other oil products; ◎ after using, please tighten the end of the barrel in time to avoid mixing water and impurities;
This product should be stored in a clean, dry and dark place.
[packaging]
* 4L iron bucket, 20L plastic bucket or packaging according to customers' requirements.
Previous:F-60 PM oil bearing oil Next:7007, 7008 general aviation grease
